Posted  by  admin

8 Slot T Track

  • Includes tips for sharpening router bits, and setting router table fence distance. Why spend money on buying t-tracks, when you can cut your own t-slots,.
  • These plates have three T-slots for use with T-slot nuts, bolts, and setup studs. There is a slot along each side of the plate for mounting with clamps. Aluminum plates are lightweight and have mild corrosion.
  1. 8 Slot T Track Lost Phone
  2. 8 Slot T Track
  3. 8 Slot T Track Hardware
Aluminum T-Track
3/4' Aluminum T-Track
Commonly used for Spinnaker Track on boats to 20' (6M), and for Jib Tracks on boats to 24'.
3/4' Aluminum T-Track - Black: Mer 7000B-__':
3/4' Aluminum T-Track - Clear: Mer 7000C-__':
Standard 3/4' extruded Aluminum T-Track is 3/4' wide with a 1/8' thick flange (22x3mm), and is (maximum) 5/16' (8mm) high. Track is drilled for 1/4' (6mm) FH screws on 4' (102mm) centers, and has 1/4' stop holes in between.
Available in 2', 3', 4', 6', 8', 10' & 12' lengths, please specify.
* Due to hole spacing constraints, length tolerance is +/- 2 1/4'. When ordered in pairs, both pieces will be the same length. If a precise length or distance to first hole is required, please specify details.
End Stop for 3/4' Aluminum T-Track - Black: Mer 7000B-ES:
End Stop for 3/4' Aluminum T-Track - Gray: Mer 7000C-ES:
Black or Gray plastic End Stop for 3/4' T-Track extends 7/8' beyond Track and fastens with a 1/4' (6mm) FH screw 5/16' from Track end.
1' Aluminum T-Track
Commonly used for Spinnaker Track on boats to 30' (9M), and for Jib Tracks on boats to 32'.
1' Aluminum T-Track - Black: Mer 7001B-__':
1' Aluminum T-Track - Clear: Mer 7001C-__':
Standard 1' extruded Aluminum T-Track is 1' wide with a 1/8' thick flange (26x3mm), and is (maximum) 3/8' (10mm) high. Track is drilled for 1/4' (6mm) FH screws on 4' (102mm) centers, and has 1/4' stop holes in between.
Available in 2', 3', 4', 6', 8', 10' & 12' lengths, please specify.
* Due to hole spacing constraints, length tolerance is +/- 2 1/4'. When ordered in pairs, both pieces will be the same length. If a precise length or distance to first hole is required, please specify details.
End Stop for 1' Aluminum T-Track - Black: Mer 7001B-ES:
End Stop for 1' Aluminum T-Track - Gray: Mer 7001C-ES:
Black or Gray plastic End Stop for 1' T-Track extends 1' beyond Track and fastens with a 1/4' (6mm) FH screw 5/16' from Track end.
1 1/4' Aluminum T-Track
Commonly used for Spinnaker Track and for Jib Tracks on boats to 50' (15M).
1 1/4' Aluminum T-Track - Black: Mer 7002B-__':
1 1/4' Aluminum T-Track - Clear: Mer 7002C-__':
Standard 1 1/4' extruded Aluminum T-Track is 1 1/4' wide with a 3/16' thick flange (32x5mm), and is (maximum) 7/16' (11mm) high. Track is drilled for 5/16' (8mm) FH screws on 4' (102mm) centers, and has 3/8' stop holes in between.
Available in 2', 3', 4', 5', 6', 8', 10' & 12' lengths, please specify.
* Due to hole spacing constraints, length tolerance is +/- 2 1/4'. When ordered in pairs, both pieces will be the same length. If a precise length or distance to first hole is required, please specify details.
End Stop for 1 1/4' Aluminum T-Track - Black: Mer 7002B-ES:
End Stop for 1 1/4' Aluminum T-Track - Gray: Mer 7002C-ES:
Black or Gray plastic End Stop for 1 1/4' T-Track extends 1 3/16' beyond Track and fastens with a 5/16' (8mm) FH screw 3/8' from Track end.
End Stop for 1 1/4' Aluminum T-Track: Mer 4473-C:
Burnished cast Aluminum End Stop for 1 1/4' T-Track fastens with a 1/4' (6mm) FH screw.
1 1/2' Aluminum T-Track
Commonly used for Spinnaker Track and for Jib Tracks on boats over 50' (15M).
1 1/2' Aluminum T-Track - Black: Sch 41-12':
Standard 1 1/2' extruded Aluminum T-Track is a 1 1/2' (38mm) wide with a 1/4' (6mm) thick flange, and is (maximum) 1/2' (13mm) high. Track is drilled for 3/8' (10mm) FH screws on 4' (102mm) centers, and has 7/16' (11mm) diameter stop holes in between. Black hardcote anodized T-Track is available in 12-foot lengths.
End Stop for 1 1/2' Aluminum T-Track - Black: Sch 74-39:
Cast Aluminum End Stop for 1 1/2' T-Track extends 1 3/8' beyond Track and fastens with a 3/8' (10mm) FH screw 1/2' from Track end. With Black anodized finish.

Works with standard 3/4' x 3/8' miter gauges with or without a T-slot. Our track is great for shop built router tables that are not equipped to handle a miter gauge. You can add a miter or sliding fixture to anything that can be routed out to fit the Miter T-Track work bench, table saw extensions, drill press tables, and band saw tables. The miter T-bar slides into the miter track or miter slot in your table saw. The T-bar can be used to make sliding jigs and other fixtures throughout the shop. Add a lock down knob by drilling and tapping the T-bar, there is no end to the possibilities. Use #7785 (1-1/4' Straight bit) to make the groove for the Miter T-Track. T-Track length may vary up to 1/8'.

Miter T-Track and T-Bar

Includes tips for sharpening router bits, and setting router table fence distance. Why spend money on buying t-tracks, when you can cut your own t-slots,.


A #9871 32' T-Track................$16.95

A #1702 (9864) 48' T-Track.....$19.95

B #9872 32' T-Bar....................$16.95

B #9865 48' T-Bar....................$24.95

SlotMiter T-Track and T-Bar SetsHardware

8 Slot T Track Lost Phone


8 Slot T Track

SAVE $4.95! 32' Set includes #9871 amd #9872. Regular Price $33.90.

#9873..........................$28.95

8 Slot T Track Hardware

SAVE $6.95! 48' Set includes #9864 amd #9865. Regular Price $49.90.

#9863..........................$42.95